A test of multiple hypotheses for the function of call sharing in female budgerigars, Melopsittacus undulatus

In many social species group, members share acoustically similar calls. Functional hypotheses have been proposed for call sharing, but previous studies have been limited by an inability to distinguish among these hypotheses. We examined the function of vocal sharing in female budgerigars with a two-part experimental design that allowed us to distinguish between two functional hypotheses. The social association hypothesis proposes that shared calls help animals mediate affiliative and aggressive interactions, while the password hypothesis proposes that shared calls allow animals to distinguish group identity and exclude nonmembers. We also tested the labeling hypothesis, a mechanistic explanation which proposes that shared calls are used to address specific individuals within the sender–receiver relationship. We tested the social association hypothesis by creating four–member flocks of unfamiliar female budgerigars (Melopsittacus undulatus) and then monitoring the birds’ calls, social behaviors, and stress levels via fecal glucocorticoid metabolites. We tested the password hypothesis by moving immigrants into established social groups. To test the labeling hypothesis, we conducted additional recording sessions in which individuals were paired with different group members. The social association hypothesis was supported by the development of multiple shared call types in each cage and a correlation between the number of shared call types and the number of aggressive interactions between pairs of birds. We also found support for calls serving as a labeling mechanism using discriminant function analysis with a permutation procedure. Our results did not support the password hypothesis, as there was no difference in stress or directed behaviors between immigrant and control birds.     

Offshore windmill farms: threats to or possibilities for the marine environment

A massive development of offshore windmill farms has been planned along the European coastline. This raises important questions about the possible effects on the marine environment. Effects during the construction period may be minimized to a negligible impact if care is taken to avoid areas containing rare habitats or species. Disturbance caused by noise, vibrations, and electromagnetic fields during windmill operation may, with present knowledge, be considered to be of minor importance to the marine environment. The reef effect (i.e. addition of a hard substratum), is believed to cause the largest impact on the marine environment and at different scales: the micro scale, which involves material, texture, and heterogeneity of the foundation material; the meso scale, which involves the revetments and scour protection; and the macro scale, which encompasses the level of the entire windmill farm. Effects on these scales are discussed in relation to results obtained from natural habitats, artificial reefs, and other man-made constructions at sea.     

Determination of airborne anhydrides using LC-MS monitoring negative ions of di-n-butylamine derivatives

An air sampling method for simultaneous determination of organic acid anhydrides and isocyanates is presented. Air samples are collected in impinger flasks filled with 0.01 M di-n-butylamine (DBA) in a mixture of toluene-acetonitrile (7:3, v/v) with a 13 millimetre glass fibre filter in series. The amount of anhydrides and isocyanates are determined as their amide and urea derivatives using LC-MS. Four anhydrides, maleic anhydride (MA), phthalic anhydride (PA), tetrahydrophthalic anhydride (TA) and cis-hexahydrophthalic anhydride (HA) and 11 isocyanates could be separated in 9 minutes using gradient elution. Anhydride-DBA derivatives in standard solutions were quantified using LC with chemiluminescent nitrogen detection (CLND). Anhydride-DBA derivatives were found to be stable for at least two months when stored in acetonitrile or toluene in the freezer. The yield of DBA derivatives of anhydrides in the 0.01 M DBA in toluene-acetonitrile (7:3, v/v) was in the range of 70->95%. Using MS and negative electrospray ionisation (ES-) linear calibrations curves were obtained for the anhydrides with correlation coefficients ranging from 0.9970-0.9997. The instrumental detection limit for the anhydrides ranged from 10-30 fmol, based on a signal to noise root mean square (RMS) ratio of 3. Monitoring positive and negative ions simultaneously, both isocyanates and anhydrides could be determined as their DBA derivatives in the same chromatographic run. When air samples were collected during thermal degradation of different coated metal sheets both anhydrides and isocyanates were present in the same samples and all the studied anhydrides were found.     

Determination of technical grade isocyanates used in the production of polyurethane plastics

A method for determination of technical grade isocyanates used in the production of polyurethane (PUR) is presented. The isocyanates in technical grade products were characterised as di-n-butylamine (DBA) derivatives using LC-MS and LC-chemiluminescent nitrogen detection (CLND) and the total isocyanate content was compared to a titration assay. For collection of isocyanates in air, an impinger-filter sampling technique with DBA as derivatisation reagent was used. Characterised DBA and nonadeuterium labelled DBA derivatives of isocyanates in technical products were used as calibration standards and internal standards, respectively, in the analysis of air samples. Three workplaces were studied where PUR products were produced either by spraying or by moulding. In both technical products and in air samples, a number of monomeric, oligomeric and prepolymeric isocyanates of e.g. methylenebisphenyl diisocyanate (MDI) and hexamethylene diisocyanate (HDI) were characterised. Several of these have not previously been described in workplace atmospheres. In the technical isocyanate products, between 69 and 102% of the NCO content determined by titration was accounted for by LC-CLND. Quantifications of a wide range of isocyanates in air samples were performed with correlation coefficients in the range 0.988-0.999 (n= 8) and the instrumental detection limits were 0.7-25 pg. At the two workplaces where MDI- and HDI isocyanurate-based products were sprayed, the isocyanate composition in the air reflected the composition in the technical product. At the workplace where a MDI-based product was used in a moulding process, only the monomeric isocyanates were found in the air. The advantage of using characterised technical grade isocyanates as analytical standards was clearly demonstrated and the possibility of using index compounds when monitoring isocyanate exposure is discussed.     

Determination of isocyanates, aminoisocyanates and amines in air formed during the thermal degradation of polyurethane

An air sampling method for the determination of isocyanates, aminoisocyanates and amines formed during the thermal degradation of polyurethane (PUR) is presented. The method is based on the collection of air samples using impinger flasks containing di-n-butylamine (DBA) in toluene with a glass fibre filter in series. Isocyanates are derivatized with DBA to urea derivatives, and amines are derivatized in a subsequent work-up procedure with ethyl chloroformate (ET) to carbamate esters. Amine, aminoisocyanate and isocyanate derivatives were characterized using liquid chromatography-time of flight mass spectrometry (LC-TOFMS) and liquid chromatography-chemiluminescent nitrogen detection (LC-CLND). Quantification was performed by LC-MS, monitoring molecular ions [MH]+ in the electrospray mode. The instrumental detection limits for amines, aminoisocyanates and isocyanates were in the ranges 30-40, 2-3 and 3-70 fmol, respectively. Thermal degradation products of PUR were observed in high concentrations during welding in district heating pipes and PUR-coated metal sheets. Eleven isocyanates, three amines and five aminoisocyanates were identified. The concentrations of isocyanates, aminoisocyanates and amines in samples collected in the smoke close to the welding spot were in the ranges 150-650, 4-290 and 1-70 ppb, respectively. In samples collected in the breathing zone, isocyanates and aminoisocyanates were observed in the ranges 9-120 and 4-19 ppb, respectively. The compounds were present in both gas and particle phases. Volatile compounds dominated in the gas phase, whereas less volatile compounds dominated in the particle phase. The method presented makes it possible to sample and determine amines and aminoisocyanates, in addition to isocyanates. The need to monitor these compounds is clearly illustrated by the high concentrations found during the thermal degradation of PUR.     

Landfill Bioreactor Cells as Ecofilters for Extraction of Bio-energy and Nutrients from Solid Wastes

This paper describes a modified, ecologically based waste treatment technique, where municipal solid waste is anaerobically treated in landfill reactorcells in a way that both bio-energy and nutrients can be recovered. The controlled landfill reactorcell ('bioreactor-cell') serves as an anaerobic filter, where energy is extracted as biogas while nutrients are recovered through the leachates. The leachates can be used as fertilizer in e.g. energy forests within the controlled landfill area, and thus nutrients can be brought back into an ecocycle. At the same time anaerobic conditions result in an effective immobilization of heavy metals and other pollutants, e.g. through complexation to organic matter or as insoluble metal sulphides, which are immobilized in the fermentation residue. The long-lived organic fraction, remaining after the fermentation process has declined, containing a high content of lignine, serves as a water-holding matrix. Thus it helps to enforce a sustainable high moisture level, resulting in sustainable anaerobic conditions with heavy metals retained on a long-term basis. Also non-degradable products, like plastics, help to shield off oxygen and maintain reliable anaerobic conditions. Landfilling of organic matter under anaerobic conditions is a measure to counteract increasing concentrations of CO₂ in the atmosphere, resulting from human activities. A small fraction of the organic matter is long-term accumulated in the landfill, and the processes can be compared to those of natural wetlands.     

The multiple market-exposure of waste management companies: a case study of two Swedish municipally owned companies

This paper describes how the business model of two leading Swedish municipally owned solid waste management companies exposes them to four different but related markets: a political market in which their legitimacy as an organization is determined; a waste-as-material market that determines their access to waste as a process input; a technical market in which these companies choose what waste processing technique to use; and a commercial market in which they market their products. Each of these markets has a logic of its own. Managing these logics and articulating the interrelationships between these markets is a key strategic challenge for these companies.